Release Agents

XTEND 19ZAM Mold Release

XTEND 19ZAM Semi-Permanent is similar to 19RSS but primarily designed for cold shop environments where curing conditions are poor. In most production environments, 19RSS is our first choice.

Product

Part No.

Axel xtend 19ZAM (US gal)

016054

XTEND 818 Mold Release

XTEND 818 is a wipe on, leave on semi-permanent mold release system used for gel coats where high gloss is desired. 818 provides a durable coating and permits multiple releases without transfer at both ambient and elevated temperatures.

  • No prerelease
  • No fish eye or orange peel!
  • Requires XTR Mold Sealer

Product

Part No.

Axel xtend 818 (US gal)

016055

XTEND CX-500 Cleaner

XTEND CX-500 Cleaner is an excellent, quick flashing, solvent-based mold cleaner for use before applying sealer. Use of CX-500 should be considered mandatory to remove polishes and compounds prior to applying any AXEL XTEND product (semi-permanent).

Product

Part No.

Axel XTEND CX-500 (US gal)

016056

XTEND XTR Sealer

XTEND XTR Sealer is a wipe on/wipe off solvent-based sealer for new molds, repaired molds, and for seasoned molds when 818 will be used. XTR polishes to a streak-free surface and improves mold release longevity. Good for all thermoset resins.

  • Maintains and enhances surface gloss
  • Protects molds
  • Cures fast
  • Reduces hazing & buildup (from monomers/resins)
  • Superior chemical resistance

Product

Part No.

Axel xtend XTR (US gal)

016057

1000P Hi-Low paste wax

Contains a blend of synthetic waxes and is one of FK’s premium mould release waxes. Proper application of this wax will result in a film that has high gloss and has resistance to intensive wear, heat and water. Good for up to 275º F or 135º C.

Product

Part No.

1000P Hi-Low Paste Wax (14.5 oz)

016035

1004-23 – Gel Coat Release Paste Wax

Formulated so as to be brushed over gel coat before the final wax coat is applied without worrying about fish eye. Recommended to be applied to any mould surface, whole or partial, where brushing the gel coat on the mould is required. Can be used over #1000P as the final coat or used by itself when gel coating.

Product

Part No.

1004-23 Gelcoat Release Wax (14.5 oz)

016036

333MR

  • True high-gloss paste wax.
  • Withstands high-temperature exothermic reactions of resins and does multiple releases easily
  • Contains carnauba wax, synthetic waxes and high-temperature resistant resins for effective multiple releases of plastic parts through numerous cycles
  • Good for up to 230º F or 110º C
  • Buttery texture provides easy on/off applications
  • Sets up faster and harder and assures quick, clean releases without wax buildup or transfer
  • Recommended for the effective release of any FRP or cultured marble parts, polyesters, polyurethane, etc

Product

Part No.

333MR Blue Paste Wax (14.5 oz)

016037

Honeywax

Honey Wax is a high gloss honey-colored paste wax formulated for
use in the reinforced fibreglass product markets as an extremely
effective mold release agent. Honey Wax is compounded with the
purest grade carnauba wax plus special binders and spreading agents.
Honey Wax creates a durable wax surface that remains intact for
additional release operations. It also eliminates build-up of
excess wax.

Product

Part No.

Honeywax

016029

86 Seal Kote

A polymer solution designed for efficient “sealing of porosity” in new and rejuvenated moulds. Aids and assists the wax release agents to assure a clean and easy demoulding.

Product

Part No.

86 Seal Kote Porosity Sealer (US Gal)

016051

69 Mould Cleaner & Stripper

Specially formulated for the Fiberglass Reinforced Plastic (FRP) Industry to clean moulds and relieve the problems of wax build-up & over-spray from mould surfaces. Important mould release components of Hi-Low Temp 1000 series waxes are specially blended in this product to liquefy and remove most waxes from the moulds. Can also be used as an inter-phase item for the wax system for prolonged releases and as a cleaner for sharper moulds and parts.

Please note #69 does not relieve Styrene burns.

Product

Part No.

69 Anti-Static Liquid Release & Stripper (US Gal)

016038

1000L

Specially designed for use between multiple releases to relieve the wax build up and reduce surface tension in moulds. Helps to prolong the life of multiple cycle releases. Solvents in the product liquefy the mould release waxes to form an even coat on the mould for easy de-moulding.

Product

Part No.

1000L Anti-Static Hi/Low Liquid Release wax (US Gal)

016039

68 Edge Wax

Formulated specifically for FRP and cultured marble industries where a flange- or edge-wax is required to assist in the prompt and easy release of the part.· Edge Wax is a semi-paste and it incorporates synthetic waxes into a system that forms a film that is virtually unbendable when applied as follows.

Directions

Apply 3 consecutive coats of #68 Edge Wax. Allow each coat to dry before applying the next one. Apply 2nd and 3rd coats to all flanges, corners, edges and areas where a gloss is not required. This builds up a wax surface that will produce multiple releases and should only require periodic application unless the area is marred when pulling the part. Reapply the Edge Wax to affected areas and a thin coat all over to get an even film.

Product

Part No.

68 Edge Wax (US Gal)

016040